SunVox 2.1.1c

version 2.1.1c

Nov 29, 2023
Version 2.1.1c
* Sampler: new controller "Tick length" (affects the duration of the envelopes);
* new example: NightRadio - Frozen;
* bug fixes.

version 2.1.1b

Nov 1, 2023
Version 2.1.1b
fixed bug with saving OGG sample

version 2.1.1

Oct 23, 2023
Version 2.1.1
* iOS 11 support has been dropped; now the minimum is 12;
* now you can also load samples in the following formats (on ALL platforms): 64-bit WAV/AIFF, OGG (Vorbis), MP3, FLAC;
* export to FLAC and OGG (Vorbis);
* Modulator: the accuracy of the phase modulation mode has been increased (but only if the version of SunVox 2.1.1 (and higher) is specified in the project properties);
* Modulator: new controller "Max phase modulation delay";
* Vorbis player: new controller "Ignore Note OFF" (play every note endlessly);
* MetaModule: new option "Auto BPM/TPL" (synchronize BPM and TPL of the module with BPM and TPL of the parent project);
* Pattern Editor: new function "Sync with timeline" - sync the cursor with the timeline (+shortcut, unassigned by default);
* Timeline: new function "Sync with pat.editor" - sync the cursor with the pattern editor (+shortcut, unassigned by default);
* sample editor: new function "Mono to stereo" (editor menu -> Misc);
* auto-repeat in the virtual (on-screen) text keyboard;
* new modules and examples;
* bug fixes.

version 2.1c

Mar 15, 2023
Version 2.1c
v2.1c: bug fixes.
v2.1b:
* Loop: new controller "On NoteON" (restart with transition to zero iteration (record);restart current iteration); see simple_examples/loop4.sunvox;
* bug fixes.
v2.1:
* now the interface is displayed in high resolution; if you want to switch back to the normal low resolution mode (on some devices this will increase the FPS) - go to the Preferences -> Interface -> Low resolution;
* Preferences -> Audio -> Additional options: new option "minimize the amount of system-supplied signal processing" (measurement mode);
* high resolution icons;
* high resolution fonts with fractional scaling; you can disable these features in Preferences -> Interface -> Fonts;
* sound engine optimization;
* Distortion: new type "saturation" (adding odd harmonics) + five of its variations;
* MultiSynth: new option "Output port number = random" (three different algorithms are available);
* Loop: new controller "Length unit" (line/128;line;line/2;line/3;tick;ms;Hz);
* Loop: new controller "Maximum buffer size" (in seconds) to protect against allocating too much memory;
* Loop: the maximum of the "Repeat" controller has been increased to 128 (128 = repeat endlessly);
* new curve types for ADSR and FMX modules: rect; smooth rect; 2-bit (linear); 3-bit; 4-bit; 5-bit;
* module editor menu: new function "Mute/Solo buttons" to show/hide the Bypass/Mute/Solo buttons under each module;
* musical keyboard: the new panel with additional functions and settings; to open it - increase the height of the keyboard and press the appeared "+" button;
* musical keyboard settings: type (classic, uniform, free (any frequency)), number of rows, key width, color inversion, autorepeat;
* new way to edit a pattern - drawing with a brush; go the pattern editor menu and select "Draw" - this will open the pattern drawing tools;
* for a more detailed description of working with a brush, see https://warmplace.ru/soft/sunvox/manual.php#pdraw
* new features in the pattern editor menu: Copy to brush; Reverse; Draw (open pattern drawing tools);
* Preferences -> Timeline: new option "Hexadecimal track numbers";
* Preferences -> Toolbars: the buttons on the horizontal dividers can be customized here; see https://warmplace.ru/soft/sunvox/manual.php#toolbars
* pattern editor menu -> Remap: module number -1 = all modules;
* more detailed pattern names after the live recording;
* new pattern effect (column EE): 35 - bind MIDI OUT message XX (0 - Program Change; 1 - Channel Pressure; 2 - Pitch Bend Change) to controller YY (0 - OFF; 0x80 - MIDI controller 0; 0x81 - MIDI controller 1...); for the specified module only;
* new special pattern command: "XX" - stop the module, clear its internal buffers and put it into standby mode;
* new keyboard shortcuts (unassigned by default) that open the corresponding tool windows in the pattern editor:
* interpolate;
* transpose;
* cyclic shift;
* set effect;
* draw;
* new keyboard shortcuts (unassigned by default) for the pattern editor:
* clear pattern;
* shrink pattern /2;
* expand pattern *2;
* slice by cursor;
* reverse;
* pattern properties;
* show/hide CCEEXXYY columns;
* scale;
* insert a special command "Stop the Module" (XX);
* new keyboard shortcuts for working with the brush:
* CTRL+E - play current note (in the pattern editor) and copy it to the brush;
* CTRL+L - play the notes of the current line (in the pattern editor) and copy it to the brush;
* play the 1st line of the brush (unassigned by default);
* сopy selected area of the pattern to the brush (unassigned by default);
* CTRL+G - paste from the brush;
* new modules in the instruments/ and effects/ folders;
* new examples:
* SunVox Compo 2022.02 winners: fuzion_mixer & Logickin - Synthonic Voyage, RobloxFan75000 - Hypermatic, PhilipBergwerf - We want Peace;
* NightRadio - Cycles of Light;
* updated version of SunVox library for developers: https://warmplace.ru/soft/sunvox/sunvox_lib.php
* bug fixes.

version 2.0e

Mar 5, 2022 Version 2.0e
2.0e: bug fixes.
2.0:
* iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules;
* iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops);
* multiple module selection + ability to save several selected modules to a sunvox file;
* timeline: supertracks (see simple_examples/supertracks.sunvox);
* improved import of old tracker formats (XM and MOD);
* new module - FMX: 5-operator Frequency Modulation synth;
* new module - FFT frequency transformator;
* timeline menu: new option "Vertical mode";
* timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file;
* timeline menu: new function "Detach" to convert the clones to the normal patterns;
* module editor menu: new function "Detach" to detach the selected modules from the rest;
* module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule;
* now it is possible to delete modules, but keep the links;
* pattern properties: X and Y fields - exact coordinates of the pattern on the timeline;
* module properties: X and Y fields - exact coordinates of the module;
* module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle;
* module visualizer: new buttons "reset", "apply", "copy", "paste";
* ADSR-> Sustain: new value "Repeat" (repeat the envelope until the module is stopped);
* ADSR-> Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed);
* Amplifier: new controller "Bipolar DC Offset";
* Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator);
* Analog Generator: new controller "Osc2 volume" - additional oscillator volume;
* Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR);
* Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator;
* Analog Generator: new option "Increased frequency computation accuracy";
* Delay: new controller "Delay multiplier";
* Delay: new "Delay unit" values: sec/44100, sec/48000, sample;
* Delay: max delay length has been increased to 60 sec;
* Delay: new controller "Feedback" (for sound and events);
* Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time);
* Echo: new controller "Filter";
* Echo: new controller "Filter frequency";
* Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing;
* Filter Pro: new types "LP 6dB" and "HP 6dB";
* LFO: new controller "Sine quality";
* MetaModule-> Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)";
* MetaModule: number of user defined controllers has been increased to 96;
* MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F;
* MultiSynth: new option "Output port number = round-robin (cyclic)";
* Sampler: new option "Increased frequency computation accuracy";
* new pattern effects (column EE):
* 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line;
* 33 - slot sync (for sv_sync_resume() in SunVox library);
* 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats);
* 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23";
* 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value";
* new examples and modules.
See the full changelog on the site...

version 2.0d

Feb 15, 2022 Version 2.0d
2.0d: bug fixes.
2.0:
* iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules;
* iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops);
* multiple module selection + ability to save several selected modules to a sunvox file;
* timeline: supertracks (see simple_examples/supertracks.sunvox);
* improved import of old tracker formats (XM and MOD);
* new module - FMX: 5-operator Frequency Modulation synth;
* new module - FFT frequency transformator;
* timeline menu: new option "Vertical mode";
* timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file;
* timeline menu: new function "Detach" to convert the clones to the normal patterns;
* module editor menu: new function "Detach" to detach the selected modules from the rest;
* module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule;
* now it is possible to delete modules, but keep the links;
* pattern properties: X and Y fields - exact coordinates of the pattern on the timeline;
* module properties: X and Y fields - exact coordinates of the module;
* module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle;
* module visualizer: new buttons "reset", "apply", "copy", "paste";
* ADSR-> Sustain: new value "Repeat" (repeat the envelope until the module is stopped);
* ADSR-> Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed);
* Amplifier: new controller "Bipolar DC Offset";
* Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator);
* Analog Generator: new controller "Osc2 volume" - additional oscillator volume;
* Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR);
* Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator;
* Analog Generator: new option "Increased frequency computation accuracy";
* Delay: new controller "Delay multiplier";
* Delay: new "Delay unit" values: sec/44100, sec/48000, sample;
* Delay: max delay length has been increased to 60 sec;
* Delay: new controller "Feedback" (for sound and events);
* Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time);
* Echo: new controller "Filter";
* Echo: new controller "Filter frequency";
* Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing;
* Filter Pro: new types "LP 6dB" and "HP 6dB";
* LFO: new controller "Sine quality";
* MetaModule-> Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)";
* MetaModule: number of user defined controllers has been increased to 96;
* MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F;
* MultiSynth: new option "Output port number = round-robin (cyclic)";
* Sampler: new option "Increased frequency computation accuracy";
* new pattern effects (column EE):
* 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line;
* 33 - slot sync (for sv_sync_resume() in SunVox library);
* 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats);
* 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23";
* 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value";
* new examples and modules.
See the full changelog on the site...

version 2.0c

Jan 31, 2022 Version 2.0c
2.0c: bug fixes.
2.0:
* iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules;
* iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops);
* multiple module selection + ability to save several selected modules to a sunvox file;
* timeline: supertracks (see simple_examples/supertracks.sunvox);
* improved import of old tracker formats (XM and MOD);
* new module - FMX: 5-operator Frequency Modulation synth;
* new module - FFT frequency transformator;
* timeline menu: new option "Vertical mode";
* timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file;
* timeline menu: new function "Detach" to convert the clones to the normal patterns;
* module editor menu: new function "Detach" to detach the selected modules from the rest;
* module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule;
* now it is possible to delete modules, but keep the links;
* pattern properties: X and Y fields - exact coordinates of the pattern on the timeline;
* module properties: X and Y fields - exact coordinates of the module;
* module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle;
* module visualizer: new buttons "reset", "apply", "copy", "paste";
* ADSR-> Sustain: new value "Repeat" (repeat the envelope until the module is stopped);
* ADSR-> Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed);
* Amplifier: new controller "Bipolar DC Offset";
* Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator);
* Analog Generator: new controller "Osc2 volume" - additional oscillator volume;
* Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR);
* Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator;
* Analog Generator: new option "Increased frequency computation accuracy";
* Delay: new controller "Delay multiplier";
* Delay: new "Delay unit" values: sec/44100, sec/48000, sample;
* Delay: max delay length has been increased to 60 sec;
* Delay: new controller "Feedback" (for sound and events);
* Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time);
* Echo: new controller "Filter";
* Echo: new controller "Filter frequency";
* Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing;
* Filter Pro: new types "LP 6dB" and "HP 6dB";
* LFO: new controller "Sine quality";
* MetaModule-> Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)";
* MetaModule: number of user defined controllers has been increased to 96;
* MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F;
* MultiSynth: new option "Output port number = round-robin (cyclic)";
* Sampler: new option "Increased frequency computation accuracy";
* new pattern effects (column EE):
* 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line;
* 33 - slot sync (for sv_sync_resume() in SunVox library);
* 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats);
* 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23";
* 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value";
* new examples and modules.
See the full changelog on the site...

version 2.0b

Jan 25, 2022 Version 2.0b
2.0b: bug fixes.
2.0:
* iOS 11+: SunVox Audio Unit (AUv3) can now send MIDI notes and MIDI CC to other AU modules;
* iOS 13.4+: full USB/Bluetooth keyboard support (like on desktops);
* multiple module selection + ability to save several selected modules to a sunvox file;
* timeline: supertracks (see simple_examples/supertracks.sunvox);
* improved import of old tracker formats (XM and MOD);
* new module - FMX: 5-operator Frequency Modulation synth;
* new module - FFT frequency transformator;
* timeline menu: new option "Vertical mode";
* timeline menu: new functions "Load" and "Save" to load/save selected patterns from/to a sunvox file;
* timeline menu: new function "Detach" to convert the clones to the normal patterns;
* module editor menu: new function "Detach" to detach the selected modules from the rest;
* module editor menu: new function "Make MetaModule" for packing the selected modules into a single MetaModule;
* now it is possible to delete modules, but keep the links;
* pattern properties: X and Y fields - exact coordinates of the pattern on the timeline;
* module properties: X and Y fields - exact coordinates of the module;
* module visualizer: "Phase Sync" oscilloscope option has been added; activate it to see a single waveform cycle;
* module visualizer: new buttons "reset", "apply", "copy", "paste";
* ADSR-> Sustain: new value "Repeat" (repeat the envelope until the module is stopped);
* ADSR-> Smooth Transitions: new value "volume change" (the volume will change smoothly, but the envelope start is not smoothed);
* Amplifier: new controller "Bipolar DC Offset";
* Analog Generator: the "Freq2" controller has been ranamed to "Osc2" (pitch deviation of the additional oscillator);
* Analog Generator: new controller "Osc2 volume" - additional oscillator volume;
* Analog Generator: new controller "Osc2 mode" - mixing mode of the additional oscillator with the main one (add;sub;mul;min;max;bitwise AND;bitwise XOR);
* Analog Generator: new controller "Osc2 phase" - starting phase of the additional oscillator;
* Analog Generator: new option "Increased frequency computation accuracy";
* Delay: new controller "Delay multiplier";
* Delay: new "Delay unit" values: sec/44100, sec/48000, sample;
* Delay: max delay length has been increased to 60 sec;
* Delay: new controller "Feedback" (for sound and events);
* Echo: new controller "Right channel offset" (how much to shift the right channel relative to the left in time);
* Echo: new controller "Filter";
* Echo: new controller "Filter frequency";
* Filter Pro: new modes "stereo + smoothing" and "mono + smoothing" for additional parameter smoothing;
* Filter Pro: new types "LP 6dB" and "HP 6dB";
* LFO: new controller "Sine quality";
* MetaModule-> Play patterns: new values "on (repeat, endless)" and "on (no repeat, endless)";
* MetaModule: number of user defined controllers has been increased to 96;
* MetaModule: controller color can now be changed by adding "@X" to the beginning of the name, where X is the group number from 0 to F;
* MultiSynth: new option "Output port number = round-robin (cyclic)";
* Sampler: new option "Increased frequency computation accuracy";
* new pattern effects (column EE):
* 1A - fine velocity slide up/down (XX - up speed; YY - down speed); once at the beginning of a line;
* 33 - slot sync (for sv_sync_resume() in SunVox library);
* 34 - set (XX) or reset (YY) project options: 1 - no portamento on the first tick; 2 - no velocity slide on the first tick; (for compatibility with old tracker formats);
* 3C - copy track XX from from the pattern YY; for example, if XXYY = 0023, then the first track will be copied from the pattern named "23";
* 3D - write a random value to track YY; min value, max value and column must be in track 0, starting from line XX; see example "pat effect 3D random value";
* new examples and modules.
See the full changelog on the site...

version 1.9.6c

Dec 16, 2020 Version 1.9.6c
bug fixes

version 1.9.6b

Nov 25, 2020 Version 1.9.6b
bug fixes

version 1.9.5d

Feb 20, 2020 Version 1.9.5d
bug fixes

version 1.9.1